| UPPER | 100% Genuine leather breathable and skin friendly |
|---|---|
| 1. Thickness : 2.0 + 0.2 mm | |
| 2. Tear Strength : 120 N | |
| 3. Flexing Resistance : 1,50,000 cycles | |
| LINING | Imported 280 GSM non woven felt for vamp & Imported 150GSM cambrelle with foam and functional breathable textile for quarter |
| 1. Tear Strength 15 N | |
| 2. Abrasion : Dry-25,600 cycles and wet-12,800 cycles | |
| TOE CAP | Steel toe Cap- Imported EN marked powder coated heat treated rust resistant, smooth edges tested for Impact resistance of 200 joules |
| Composite toe cap – Imported polymer 30% lighter ,rust resistant,smooth edges tested for impacet resistance of 200 joules | |
| INSOLE | 2.00 mm thick non woven Anti ststic Insole tested for no surface tearing till 400 cycles. |
| IN-SOCKS | Min 3.00mm moulded arch supported EVA/PU in-socks. |
| LACES & THREAD | Nylon, twisted and resistant to appropriate breaking load. |
| OUTSOLE | Direct Injected Single or Double Density PU/PU, PU/TPU, PU/Rubber & EVA/Rubber out sole anti skid, anti static, |
| oil & fuel resistance, Our Shoes made on direct vulcanized rubber sole can withstand a temperature up to 300C. |
| PU | It’s a very light material which guarantees high levels of comfort. It has good resistance to chemicals and |
|---|---|
| hydrocarbon, but no resistance to strong acids. The temperature tolerance lies between -10 and +140 | |
| degrees. The softness of the material gives the sole a good ground adhesion, so that its slip resistance is | |
| comparable to that of TPU and rubber. | |
| PU/RUBBER | This type of sole maintains the properties of rubber in the outsole ,where as the midsole is made of PU ,Thus allowing to reduce the weight, |
| of the shoe .PU in this case is the weak spot in the most extreme situations ,where in rubber has better performance . | |
| PU/TPU | TPU (thermoplastic polyurethene) is a very sturdy and flexible material. It has very good performance such as excellent abrasion resistance |
| and slip resistance comparable to that of single-density PU and rubber.In average TPU is more durable than PU and has better protection | |
| from low temperatures (between -5 and -20 degrees). The resistance to high temperatures is not much (only upto 100 degrees maximum) . | |
| PU/PU | The sole consists of two layers of PU with different densities. It has good resistance to chemicals and hydrocarbon but no resistance to strong |
| acids. The temperature tolerance lies between -10 and +150 degrees .The soft PU midsole guarantees good shock absorption and comfort . |