KEY COMPONENTS OF A SAFETY FOOTWEAR

UPPER 100% Genuine leather breathable and skin friendly
1. Thickness : 2.0 + 0.2 mm
2. Tear Strength : 120 N
3. Flexing Resistance : 1,50,000 cycles
LINING Imported 280 GSM non woven felt for vamp & Imported 150GSM cambrelle with foam and functional breathable textile for quarter
1. Tear Strength 15 N
2. Abrasion : Dry-25,600 cycles and wet-12,800 cycles
TOE CAP Steel toe Cap- Imported EN marked powder coated heat treated rust resistant, smooth edges tested for Impact resistance of 200 joules
Composite toe cap – Imported polymer 30% lighter ,rust resistant,smooth edges tested for impacet resistance of 200 joules
INSOLE 2.00 mm thick non woven Anti ststic Insole tested for no surface tearing till 400 cycles.
IN-SOCKS Min 3.00mm moulded arch supported EVA/PU in-socks.
LACES & THREAD Nylon, twisted and resistant to appropriate breaking load.
OUTSOLE Direct Injected Single or Double Density PU/PU, PU/TPU, PU/Rubber & EVA/Rubber out sole anti skid, anti static,
oil & fuel resistance, Our Shoes made on direct vulcanized rubber sole can withstand a temperature up to 300C.

DIFFERENT TYPES OF SOLE

PU It’s a very light material which guarantees high levels of comfort. It has good resistance to chemicals and
hydrocarbon, but no resistance to strong acids. The temperature tolerance lies between -10 and +140
degrees. The softness of the material gives the sole a good ground adhesion, so that its slip resistance is
comparable to that of TPU and rubber.
PU/RUBBER This type of sole maintains the properties of rubber in the outsole ,where as the midsole is made of PU ,Thus allowing to reduce the weight,
of the shoe .PU in this case is the weak spot in the most extreme situations ,where in rubber has better performance .
PU/TPU TPU (thermoplastic polyurethene) is a very sturdy and flexible material. It has very good performance such as excellent abrasion resistance
and slip resistance comparable to that of single-density PU and rubber.In average TPU is more durable than PU and has better protection
from low temperatures (between -5 and -20 degrees). The resistance to high temperatures is not much (only upto 100 degrees maximum) .
PU/PU The sole consists of two layers of PU with different densities. It has good resistance to chemicals and hydrocarbon but no resistance to strong
acids. The temperature tolerance lies between -10 and +150 degrees .The soft PU midsole guarantees good shock absorption and comfort .